Lay The Polygonal Plates Correctly


The classic in the design of garden paths and flooring of terraces is called polygonal plates. The trend has been one of the best DIY projects for years and creates an irregular design that is a real experience for creative gardeners. For this reason, we would like to present our detailed guide, which is enhanced by good tips and accurate pictures.

Polygonal panels are considered an irregular floor covering for garden paths, terraces and front garden designs. For the laying you need a lot of expertise and a clear guidance, which could be helpful for every garden owner. For this reason, our editorial team has selected the most important steps and details that are of great importance to the process.

The beautiful appearance and irregular shape of the plates are appreciated by every front garden

Polygonal plates laying details tips

This type of design has a colorful variety of stone types that one can see here To look through. Only after the appropriate choice of polygonal plates the surface has to be prepared accordingly. In order to customize the parking space individually, you need a stable and weather-resistant substructure. If you want to build your own deck of plates, then the subsoil must be load-bearing, clean and without holes.

The subsoil should remain clean

Underground clean up polygonal plates


Very important for the preparation of the construction is that there is a slope that is about 2%. To avoid problems with the rainwater drain from the house. As an underground it is recommended to use sand or gravel, because these building materials are perfect for a stable foundation.

A gradient is very important for the rainwater drainage

Polygonal plates laying details

No matter whether it is a garden path or terraces, the area needs a border. Here you can use different borders, which fit the design of the polygonal plates. Better, the stones should be combined with the color selection of the flooring. Very important for the outline is that it is very precisely and carefully laid, because the straight line and height play a big role for the next steps in this self-construction project.

Begin by limiting the area first

Edge stones


Before the plates are laid, you have to wash off the dirt on the plates before working with cement and natural stone glue. The mixing ratio is on the package. This layer must be at least 4cm in order to obtain a necessary stability. If you have chosen a concrete layer, the concrete is poured very carefully.

Cement or concrete? The choice is in your hands

Mix preparation project

You can design and place the polygonal panels according to your own taste, since a certain sequence is unimpressive in this case. It is important that the plates, which are at the corners, are best with straight edges. Do not forget to constantly check with the water scale, because the straight line is the top priority for the construction.

For the corners only plates with straight edges are selected

Straight stones at the corner

Careful laying is required! Also leave room for the joints!

Laying of polygonal plates

After the curing time of the polygonal plates, the last step must be carried out, namely the grouting of the plates. As a first step, it is advisable to open the joints when laying, so that you can pour in more easily with trasszement. When the construction is finished, the polygonal plates must be carefully cleaned, since contamination could become a problem in the future.

Follow our tips and design the floor in front of your house with polygonal panels! Let this look peculiar and always attract all eyes! Have fun and have a good time!

Apply trasszement without contaminating the plates

Joints of polygonal plates
Self-assembly project
Polygonal plates

Related Ideas

Get more stuff like this
in your inbox

Subscribe to our mailing list and get interesting stuff and updates to your email inbox.

Thank you for subscribing.

Something went wrong.

Leave a Reply