Dream catcher yourself tinker in 11 steps
At the beginning we would inform you that the dream catcher yourself DIY is pretty easy. That’s why we take a first to tell some time over its history.
It’s a tradition that goes back to the Indian tribe Ojibwe. The people there have created this first dream catcher from Willow and sinew. They believed that all bad dreams can be captured. So the poor are caught in the net and stay there firmly held. Only in the morning be it resolved by the first rays of the Sun? Logically, not?
You also want your bad dreams in the power of a dream catcher to remain trapped, which you yourself have made? Yes, here are the 13 steps, after which you can accomplish this.
Step by step to the dream catcher himself crafts
1 step: First, you would have to get of course the necessary materials. You need tape and materials from which you make the networks anyway. You have to find the right material for the tire. You should perform this task with great caution, because it is of fundamental importance for the success of the project. Best read the next steps, as there are represented various alternatives. Make during its a list.
2 step: Make the tires first. This is usually no larger than a human hand. It can be made of beech or vine. It can be found in many different specialty stores. You need the 3 meters wood material. This is sufficient to make the tires. As an alternative you can use fresh vine and dry it. Each type of wood and metal are also allowed as materials.
3 step: Then you need tinkering to the dream-catcher itself the lacing. Thus you must wrap the tire. Usually a kind of leather used for this purpose. The length must be 8 times that of the tyre you will make. If suede cord ring gone, could tinker easily material this also from a different way.
4 step: Now select the Twine. From this you are can build the power of the dream catcher himself. Transparent nylon cord might also help. The string is usually transparent or white, but you could use also coloured such in some cases.
5 step: Wrap the tyres now. To make this, you coat it with a little glue and then you start to wrap it.
6 step: Don’t forget to make a hanger. You could cut the hanging ends with a pair of scissors.
7 step: Now we come to the most elaborate part of dream-catcher weaving. At the beginning, you should make a node on the tires. Work from here in the direction of the clock hand. Even wrap around the tires and a few centimetres further make the next node. Make some loops.
Gorgeous purple and blue
8 step: Weaving the network to the internal part of the tyre now. The nodes should now be itself attached to the thread. Decorate the whole thing with buttons or other great jewelry parts, which you previously ready made. Work through to the middle.
9 step: After you have woven anything up to a small circle in the Middle, you bind the thread at one point so he not fall apart. Make a double knot, so that it is safe.
10 step: If you want, you could install now one or two ornamental spring. Do best in a place where there’s already a node.
Now you are finished tinkering with the dream catcher himself.
11 step: The only thing you have to do now is to hang them up. We wish you sweet dreams!
Horizontally it is also
Dream catcher from several circles
Double OWL looks like
You can use also stones as decoration
Abstract shape and fine feathers
With leather and orange nuances
Oversized and simple
With a heart theme
With shell and small crystals
With pink beads
With wooden beads and white feathers
Strips of leather and turquoise beads
Colorful and elegant
Wonderful with peacock feathers
Yin and Yang
Lace and buttons
Colorful fabric tapes
Vintage dream backer
With feathers and turquoise stones
Yarn in turquoise and leather
Classic red and black
White fabric and springs