Office Accessories that bring order to the Home Office
Right in your home office is an important issue, that every freelancer can appreciate. That’s why we want to help you like, as optimally as possible to organize your work space. Standing collectors are a useful Office accessory that you can use to do this. Put your journals, magazines and documentation style in scene and make more room for other things on your desktop.
Standing collector can build even himself. Plywood is a suitable material, you can use the goal. From a sheet of plywood, a few standing collectors are feasible. And it’s not only original but also reasonably priced our DIY project. You will find instructions with images including the same…
Build standing collector wooden yourself
Required materials and tools:
♦ a plywood Board ca. 0, 4 cm thick (a sheet of plywood with the dimensions 105 x 100 cm is enough for 6 standing collector)
♦ a wood Board such as in the mass 2,3 cm x 10 cm x 150 cm (enough for 6 standing collector)
♦ Wood glue
♦ Wood paint, wood paint
♦ Ruler and pen
The wooden plate and a wooden board cut to the correct dimensions or cut at the hardware store
If you a sheet of plywood with the dimensions 105 x 100 cm (or any mass) bought then should be cut into pieces or cut at the hardware store. You need 3 pieces width 10 cm and 100 cm in length and 3 pieces 25 cm wide and 100 cm long. You should then halve them, so that the length of all pieces is 50 cm.
Measure and cut the plywood (cut)
Now, you have 6 pieces each 10 cm wide and 50 cm long and 6 pieces 25 cm wide and 50 cm long. From this, you can build 6 standing collector.
The pieces, which are 25 cm wide, cut like on the bottom of the image shown above (let).
The wood plate at an angle into 2 halves cut
The pieces that are 10 cm wide, you should also be in 2 halves (cut); but it is precisely this time, not at an angle. One half should 17 cm long enough and the others – 33 cm.
For the bottom of the standing collectors use the wooden board that you have purchased. This is 150 cm long, cut it into 6 pieces, each 25 cm long.
Now you have all the necessary elements
You need these parts for a DIY floor collector made of wood
If you have cut all the parts, then you should already assemble them or stick together in our case. Use wood glue to the target. Start with the lower part of the floor.
Assemble all parts
The piece that is 17 cm in length, comes forward and the back of the standing collector is the long piece (33 cm long).
With the tape over it, provide more strength. This is of course only until all parts firmly stick together
An alternative to the tape
Assemble all parts and dry the wood glue over night. Now you have a firmly bonded standing collector made of plywood, you can paint and decorate according to your mood colour.
DIY floor collector made of plywood
Standing collectors are great Office Accessories
Next step – coating and painting (only on request)
Add felt feet
So, you have built a few practical standing collector himself. Put it on the shelf or on the desk and arrange all your documents, paperwork, and magazines.
We hope that you enjoyed this DIY project. Stay here! We make further for you…
Useful Office Accessories for more order in the Home Office
Arrange your magazine
DIY floor collector