You Cooking Like? You Need Be Sure A Hood For The Kitchen

Editor   August 7, 2013   Comments Off on You Cooking Like? You Need Be Sure A Hood For The Kitchen

hood for kitchen lighting glass Ball pendant

You like to Cook? You need to be a fan!

They broke no huge investment to have proper ventilation at home. 9 cheap and effective solutions are here!

What’s your opinion comes in finding great hoods. Certainly, it is not just about the style. You need to know what works best in your kitchen. You have before purchasing just thought about: what do you want to achieve through your ventilation?


Here is a look at the most popular variants: built-in island above the kitchen work surface. Models of wall-mounted on the wall behind the stove or the cooking appliances.

They can be applied also in the upper cabinets and can become invisible by this or several other variants.

You have different models of downwind: can be installed hob installation or you can install separate POP up systems.

You wonder what will fit best in your kitchen? Here are a few options that you might consider

hood for kitchen island countertop cooker

Island fan

This is one of the more expensive solutions. The reason is quite simple: it must be from all angles look good. But there are also some variants with a page that is attached to the wall.

Anyway, can be regarded as a fan like a sculpture in the room. It can complement the other decorative elements in the room.

If these all are not carefully chosen and positioned, a confusion can arise quickly. Each piece you must provide enough space so this really comes into its own.

Wall-mounted fan

hood for the kitchen wall cooker black

This gorgeous object belongs Zephyr. You can mix it quickly with a work of art. Devices attached to the wall are silent and effective. In this case, you will have more than 200 colors to choose from.

Do you want to incorporate a model made of stainless steel?

hood for kitchen island white gleaming surfaces

You must measure then very carefully the height of the ceiling. Maybe you need an extension between the extractor extractor and the chimney.

Do you want to avoid the sight of pipes? Hide them in a closet.

Fan in the lower cupboards

hood for kitchen island wood facility

This type is always a very professional impression. The control panel for models like this is located on the front or on the lower side. Sometimes, you must increase the extractor puller, to achieve a symmetrical look. But in this case that has proved not necessary.

Special Extractor puller

hood for kitchen wall cabinets

Special models such as the Broan E12000 series are great for small kitchens. If the device is not in is, seen from the plant about 2.5 cm. When turned on, the piece in the direction of the lower cabinets expands.

Can you spot the extractor puller at all? It just seems to disappear between other devices made of stainless steel.

You will find a similar solution with a pipe. This requires more depth but about 5 cm. However, its appearance can be just as quiet. Done by the steel strip on the cooking zone, which strongly emphasizes the vertical appearance of the kitchen.

Do you achieve this look at home also you?

hood for kitchen island floor laminate cabinet installed

To do this, you need a professional cabinetmaker. This will build a plywood box. This should be then welded and wrapped around and this is the job of a sheet-metal Designer.

Commercial parts

hood for kitchen island countertop stove wall tiles

This variation makes the design of your own model of the vapor withdrawal possible. The different units in a stone shell were introduced in our case.

The usable parts have accessories for the control on the surface. You can be connected to a control box attached to the wall. Some manufacturers offer also remote controls. The usual commercial units need a structure that ensures a great to the 55 cm. distance from the wall.

Most commercial units have also an LED or a low-voltage halogen lamps. Considering exactly the positions of lights. Depending on the manufacturer, they can be grown on the front or back. Some can be made also in balance.

This figure shows a gentle-looking, modern kitchen

hood for kitchen island cooker Cabinet

It has a narrow commercial unit and this has been hidden by the upper cabinets. There are more and more such solutions on the market. Most of the time but can be combined this extractor puller with electric or induction hotplates.

The next example has combined the commercial unit with an external cooling fan

hood for the white tile kitchen wall painting

With this simple front surface and strip wood, man has reached a highly aesthetic solution.

A ma├čangerfertigte construction over a closed, gas stove, requires approximately 106 cm distance. So the surface can be scored. A normal oven should have approx. 92 cm distance to the wood. Many decorative coverings include also an extension on both sides of the plant. They attached also panels above the stove in this case. There, you can attach the commercial unit. You have to either choose a material in this case, which can not easily be heated or the extractor puller at a safe height.

This image shows a hanging ceiling above the small kitchen island grille

hood for kitchen lighting interesting design

You can achieve this look by a liner or a commercial unit. You can find suitable solutions for different companies, but the hanging ceiling is always essential.

Comment: The higher the fan was attached, he needs more power. The effect increases with the reduction of the distance to the stove.

Combination microwave and Extractor puller

hood for kitchen lighting dark brown Cabinet

You can bring a combination of gear for the kitchen ventilation systems. This approach has many advantages and disadvantages and the solution must take into account your own needs. Many people keep installing the microwave oven for a very easy task. However, the correct positioning of this can be crucial. This applies particularly to small kitchens.

Through the intelligent application, you can save valuable space. You can install a combo device (Miktowelle and Extractor puller) and save a lot of space. So you can visually emphasise the focus in the kitchen. Especially the owners of smaller kitchens should consider this variation into consideration.

Maybe it will be however difficult for some people, to reach the microwave oven at this point. You will sit about a potentially hot surface. I would make for example a unit over a gas stove in any case. This can have dangerous consequences.

Pop up fan after the laminar flow principle

hood for kitchen granite black countertop

For many people, this flexible solution is a total hit. You grow out of an area after a head pressure. In the next time, you can see only a stainless steel surface is collected over 4 cm. All the rest is hidden in the closet and there to the depth of 30 cm. It takes more then 30-40 cm for the dishes.

In this figure, you can see such an installation. Note the discreet approach to the grille?

Is your cooking area against an outside wall positioned?

hood for the kitchen cooker pot metal

In this case the extractor puller can instead run out into the chimney. You must follow the direction of the floor beams here. So, to avoid the risk of weakening the structure.

Discuss this with your kitchen Designer!

hood for the kitchen window stove plate

In the figure, you can see the pop up version in their full amount. Already there are on the market are up to 40 cm gathering units. These are especially good to combine with gas stove. A smaller amount can disperse the flame of the gas and contribute to dangerous situations.

Stove with a pop up hood Extractor

hood for kitchen modern facility floor lamp

The flock with a directly behind this installed Extractor puller are becoming increasingly popular. This is possible thanks to the sleek contemporary design lines. The option on the picture here would be a wonderful combination for small kitchens.

Stove with a built-in Extractor puller

hood for the kitchen wood furniture hotplate

In the picture, we see a Jen-air unit with a built-in Extractor puller. It is located in the horizontal surface. It would be also a great practical solution, right?

Do already have experience with modern solutions for Extractor puller. In terms of convenience, you should find the solution suitable in view of aesthetic and functional. I hope this article was there you help.

hood for kitchen lighting glass Ball pendant some people will love this for the clean look and others can’t stand the fan directly on the view plane

Related Ideas

Get more stuff like this
in your inbox

Subscribe to our mailing list and get interesting stuff and updates to your email inbox.

Thank you for subscribing.

Something went wrong.