Stoves: Tips For How To Handle

Editor   October 27, 2016   Comments Off on Stoves: Tips For How To Handle

Fireplaces are romantic heat dispenser, which help save energy. They are available in many different versions and can be put together individually. Modern techniques make it possible that stoves can be used as heat source, stoves and water treatment systems for domestic hot water. In dealing with the popular stoves but are some things to note, that are important to ensure a safe function and long-term usability. It all starts with the precise location of the fireplace before assembling.

The location of the stove


Before a stove is set up and put into operation, the optimum location of the fireplace in the room should be determined. This measure is used sustainably for safety and correct operation of the fireplace. To accommodate a fireplace operating correctly, it is important to check the statics of the floor on which the fireplace is to stand. Also a chimney must comply with enough distance to flammable materials in the area. There are certain fire safety regulations that specify how big the fire-proof underground around the fireplace around must fail. It should be noted where exactly the fireplace in the room to stand. Who is this uncertain, should from the outset working with experts, offer the stoves and set up. There are several providers in the Internet and in local stores.

living room 1558191_1280

Notify the chimney sweep

Who plans a fireplace and operates, which must order the chimney sweep. In addition to consulting, which can provide such as online provider such as ofen.de, the chimney sweep is one who must check the fireplace ducts on the spot in the House. He determines what shafts can be used for the new fireplace and whether any new prints must be fitted. A chimney sweep can also estimate what heating capacity for the room size is adequate. In addition, he gives tips to the space situation and points to important points, which are important in the spirit of the new stove.

Tip:   A joint appointment is worth with the chimney and the fireplace manufacturer, to discuss all the points and to match.

What type of fireplace stove do you use?

Adjust water aquifers

The proper handling of a fireplace is to note what type of oven in use is. Systems with additional functions require specific settings to ensure optimal performance. For example, dealing with water-bearing models – which via a heat exchanger, recover the heat from the fire and save it for heating water – these need to be adjusted. This help the adjustment instructions and explanations of the respective dealer. Air ducts and fans such systems can be controlled, which can be used to determine which rooms should be heated.

Similarly, stoves with soapstone essays that support the heating system of central heating.

Particulate matter regulation for fireplace stoves

Also keeping the particulate matter regulation for stoves is on the proper and safe handling of stoves. There’s a new pollutant control since April 2010. This envisages certain filtration and firing techniques. This information can provide the respective dealer. This is the model, to take into account the type and year of manufacture of the fireplace. Who owns a model that was taken before 2010 in operation, must this to at least 2024 accordingly – or retrofit.

The right fuel to provide and properly fire

Wood is an ideal fuel, which contains no heavy metals or sulphur. He is an almost ideal ecological fuel. Since wood caused no high costs from European production by transport and industrial production, wood is one of the best fuels for fireplaces. Pellets, however, need to be produced industrially. Dry wood should be used for optimum handling and the proper use of a wood-burning stove.

Use good firewood

Good fireplace wood has a moisture content of only 20%. It is stored approximately two years before it is used for heating. Woods such as beech, Birch and oak have a high calorific value – to cheer on softwoods such as pine and spruce are more suitable. Small pieces should be used when firing the stove, of them. When blue flames in the fireplace lick, get the fire enough oxygen and generates sufficient heat. White ash always indicates that a clean burning took place. Only wood is burned in the furnace, burning in the bed of ashes and no rust is required here.

Related Ideas

Get more stuff like this
in your inbox

Subscribe to our mailing list and get interesting stuff and updates to your email inbox.

Thank you for subscribing.

Something went wrong.